Skip to content
Barcodes, RFID & Enterprise Connectivity
Barcodes, RFID & Enterprise Connectivity

How to Choose the Right Barcode Labels and Ribbons

Barcode labels, printer ribbons, and adhesives can seem pretty simple in principle. But choosing the right options for your requirements is essential if you want to achieve excellent print quality and durability.

It’s also vital to make sure that your labels or tags remain securely attached, scannable, and readable once they’re in your operating environment.

Let’s take a look at the key components and materials that need to work together to provide the right printing and labeling results for each application.

Barcode Label Composition and Anatomy

The anatomy of a barcode label is more complex than you might realize. Choosing the right combination of label materials is essential for ensuring print quality, proper application, reliable adhesion, durability, and long-term barcode readability. A typical barcode label consists of several important layers.

Topcoat: The topcoat provides a final layer of specialized protection, depending on your application. It helps keep printed barcodes and information scannable, readable, and durable after the label has been applied and put into use.

Facestock: The facestock is the primary material of the label. Choosing the right facestock helps ensure excellent print quality. When properly matched with the application and printer ribbon, it can also minimize the need for frequent print darkness adjustments.

Adhesive: Standard adhesives work well for many everyday labeling applications. However, more specialized adhesives may be required for extreme temperatures, rough surfaces, curved objects, slick materials, or other challenging conditions. Selecting the appropriate adhesive helps ensure that labels remain securely attached throughout their intended use.

Release Liner and Silicone Coating: The release liner is a protective backing sheet, typically made from paper or plastic film. A thin silicone coating is applied to the liner to create a non-stick surface. Together, these layers protect the adhesive and prevent the label from sticking prematurely before application.

Key Factors in Choosing the Right Labels, Ribbons, and Adhesives

1. Printing Type - One of the most important considerations when choosing barcode labels is the type of printing technology you use. The two main options are direct thermal and thermal transfer printing.

Direct Thermal Printing

Direct thermal printing creates images directly on heat-sensitive label material without requiring a ribbon. It is commonly used for short-term labeling applications, including shipping, office use, and other basic identification needs.

Thermal Transfer Printing

Thermal transfer printing uses a heated printhead to transfer ink from a ribbon onto the label surface. This method is generally preferred when printed barcodes and information must remain readable over longer periods or withstand demanding environmental conditions.

2. Ribbon Type- If your application requires thermal transfer printing, selecting the correct ribbon is essential. The ribbon must be compatible with both your label material and the environmental conditions in which the label will be used.

  •  Wax Ribbons: Wax ribbons are commonly used for general-purpose applications with limited exposure to moisture, chemicals, or abrasion. They are typically suitable for standard paper labels in relatively controlled environments.
  • Wax/Resin Ribbons: Wax/resin ribbons offer improved durability and resistance to moderate abrasion and certain chemical exposures. They are often used when applications require greater print durability than standard wax ribbons can provide.
  • Resin Ribbons :  Resin ribbons provide high levels of durability and resistance to demanding conditions, including harsh chemical exposure and heavy abrasion. They are commonly used with synthetic label materials for industrial and long-term identification applications.

For applications requiring UL/cUL approval, the complete label and ribbon combination must meet the applicable certification requirements.

3. Your Specific Use Case - Ultimately, your labeling environment and application requirements determine which label materials, adhesives, and ribbons are the best fit. Here are some of the most important factors to consider.

The Surface to Be Labeled

Rough, curved, slick, or unusual surfaces may require specialized label materials and adhesives. The correct combination helps ensure that the label adheres properly, and stays attached throughout its intended use.

Extreme Temperatures

Temperature is another critical factor in label selection. There are two important measurements to consider:

  • Application Temperature: The temperature at which the label is applied to the surface.

  • Service Temperature: The temperature ranges the label will experience after application.

Standard label materials may not be suitable for extreme heat or cold. For applications outside normal temperature ranges, specialized thermal transfer labels and adhesives may be required.

Abrasion Resistance

If labels will be exposed to frequent rubbing, scratching, or abrasion, a more durable ribbon may be necessary. Wax/resin ribbons can provide moderate abrasion resistance, while resin ribbons are generally preferred for more demanding applications.

Applicator Use

If you use an automated label applicator, your labels must be designed to feed, peel, and apply correctly. Specialized label constructions and compatible materials may be needed to ensure smooth, reliable application.

Chemical Resistance

Labels exposed to chemicals may require higher-durability materials and ribbons. Depending on the type and concentration of chemicals involved, a wax/resin or full resin ribbon may be necessary.

Indoor and Outdoor Use

Outdoor labeling applications often involve exposure to sunlight, rain, snow, moisture, and changing temperatures. Synthetic thermal transfer labels are commonly preferred for these conditions because they offer greater durability and resistance to fading, smudging, and environmental damage.

Print Speed, Darkness, and Dots Per Inch (DPI)

Different label materials and ribbon combinations can affect printing performance. Some materials require higher print darkness settings, different print speeds, or specific printer resolutions to achieve optimal results.

Understanding these requirements helps minimize tradeoffs and ensures consistent print quality.

Choosing the Right Combination for Your Labeling Requirements

Selecting the correct label, ribbon, and adhesive combination can become complicated, especially for applications beyond basic office, storage, or shipping use. There are many variables to consider, including printing technology, label construction, ribbon composition, adhesive performance, and environmental conditions. Fortunately, there are two ways to make the selection process easier.

1. Download Our Zebra Printing Supplies Selector Guide: The Zebra Printing Supplies Selector Guide provides detailed label, ribbon, and adhesive recommendations for a wide variety of applications using Zebra printers. These recommendations are supported by product development, testing, and quality processes. The guide can help you narrow down the available options and identify materials suited to your specific requirements.

2. Consult with a Barcode Labeling Expert: If you want to save time and avoid costly mistakes, consulting with a labeling specialist can help. At Summit, our experts work with customers to identify the right labels, ribbons, and adhesives for their barcode printing and tracking applications.

Our team has experience with a wide range of labeling requirements and can help evaluate the most appropriate materials for both standard and specialized use cases. We also have access to Zebra product specifications, technical resources, and research and development expertise to help identify solutions for more complex applications.

Get the Right Labels and Ribbons with Summit

Choosing the right barcode labels and ribbons is essential for maintaining reliable printing, accurate tracking, and long-term operational efficiency. The right materials can help improve barcode readability, reduce unnecessary maintenance, and prevent costly labeling failures.

Contact us today to get expert advice and find the best barcode labels, ribbons, and adhesives for your specific application.

Next article Hidden Costs That Drain Thousands of Dollars in Barcode Label Printing